Qick Find
Location: Home / Products / Gel Technology Batteries

Products Summary

Generally GEL type battery is a “recombinant” battery, maintenance-free, as it never needs watering, The oxygen generated inside cells is trapped by special pressurized sealing vents and it moves to the negative plate through tiny fissures or cracks in the gelled electrolyte. The sealing vent is critical to the performance of the GEL type battery. The cell must maintain a positive internal pressure. Otherwise the recombination of the recombination of the gases will not take place, and the cell will dry out and not perform. In addition, the valve must safely release any excess pressure that may be produced during overcharging. Otherwise, the cell would be irreparably damaged.

Special precautions for GEL type battery charging:
While STANDHBS Power GEL batteries will accept a charge extremely well due to its low internal resistance, any battery will be damaged by continual undercharging or overcharging is especially harmful to gel cells because of their sealed design. Overcharging dries out the electrolyte by driving the oxygen and hydrogen out of the battery through the safety valves. Performance and life are reduced. If a battery is continually undercharged, a power-robbing layer of sulphate will build up on the positive plate, which acts as a barrier to electron flow. Premature plate shedding can also occur. Performance is reduced and life is shortened. Therefore, it is critical that a charge be used that limits voltage to no more than 2.35volts/cell and no less than 2.30volts/cell at 68F.Batteries used in float service should be charged at 2.30volts/cell.For cycle service, a maximum voltage of 2.35volts/cell should be used.

General Specifications Table

Code Nominal
Voltage
(V)		 Capacity
(AH)		 Dimensions Weight Terminal Date
Sheet
Length Width Heigth Total Height Kg lb Type Position
mm in mm in mm in mm in
  GEL2-50 2 50 161 6.34 50 1.97 166 6.54 166 6.54 3.00 6.62 T17 A
  GEL2-100 2 100 171 6.73 72 2.84 205 8.07 210 8.27 5.60 12.35 T17 A
  GEL2-150 2 150 172 6.77 102 4.02 205 8.07 227 8.94 8.40 18.52 T11 A
  GEL2-200 2 200 172 6.77 111 4.37 330 13.00 365 14.37 14.30 31.53 T19 G
  GEL2-250 2 250 172 6.77 150 5.91 330 13.00 365 14.37 17.50 38.59 T19 G
  GEL2-300 2 300 172 6.77 150 5.91 330 13.00 365 14.37 20.00 44.10 T19 G
  GEL2-350 2 350 211 8.31 175 6.89 330 13.00 365 14.37 25.00 55.17 T19 H
  GEL2-400 2 400 211 8.31 175 6.89 330 13.00 365 14.37 27.50 60.64 T19 H
  GEL2-500 2 500 241 9.49 175 6.89 330 13.00 365 14.37 35.00 77.18 T19 H
  GEL2-600 2 600 301 11.85 175 6.89 330 13.00 365 14.37 42.00 92.61 T19 H
  GEL2-800 2 800 410 16.14 175 6.89 330 13.00 365 14.37 57.00 125.70 T19 J
  GEL2-1000 2 1000 475 18.70 175 6.89 330 13.00 365 14.37 66.50 146.60 T19 J
  GEL2-1500 2 1500 401 15.79 350 13.78 342 13.47 378 14.88 100.00 220.50 T19 K
  GEL2-2000 2 2000 490 19.29 350 13.78 342 13.47 383 15.08 132.00 291.10 T19 L
  GEL2-3000 2 3000 712 28.00 353 13.90 340 13.39 382 15.04 180.00 396.90 T19 L
  GEL6-100 6 100 194 7.64 170 6.69 207 8.15 210 8.27 16.00 35.28 T19 A
  GEL6-150 6 150 260 10.24 180 7.09 247 9.72 251 9.88 24.00 52.92 T19 A
  GEL6-200 6 200 323 12.72 178 7.01 224 8.82 228 8.98 31.00 68.35 T19 A
  GEL12-12 12 12 151 5.94 98 3.86 95 3.74 101 3.98 4.00 8.82 F2 F
  GEL12-18 12 18 181 7.13 76 2.99 167 6.57 167 6.57 5.70 12.57 T5 D
  GEL12-24 12 24 175 6.89 166 6.54 125 4.92 125 4.92 8.40 18.52 T5 D
  GEL12-33 12 33 195 7.68 130 5.12 159 6.26 183 7.20 10.50 23.15 T7 D
  GEL12-40 12 40 197 7.76 165 6.50 170 6.69 170 6.69 13.20 29.11 T17 D
  GEL12-55 12 55 230 9.04 138 5.44 209 8.23 213 8.39 17.30 38.15 T17 C
  GEL12-65 12 65 350 13.78 166 6.54 176 6.93 176 6.93 21.60 47.63 T10 C
  GEL12-75 12 75 258 10.16 168 6.62 208 8.19 212 8.35 24.00 52.80 T18 C
  GEL12-90 12 90 305 12.01 168 6.61 208 8.19 212 8.35 28.00 61.73 T19 C
  GEL12-100 12 100 330 12.99 172 6.77 215 8.46 221 8.70 31.50 69.46 T19 C
  GEL12-120 12 120 406 15.98 174 6.85 208 8.19 233 9.17 37.00 81.58 T12 C
  GEL12-150 12 150 485 19.09 172 6.77 240 9.45 240 9.45 46.00 101.40 T11 C
  GEL12-200 12 200 525 20.67 243 9.57 220 8.66 245 9.65 63.00 138.90 T14 E
  GEL12-230 12 230 521 20.51 269 10.59 203 7.99 232 9.13 68.00 145.50 T14 E
 

 

Features

·Completely maintenance free. Sealed construction eliminates periodic watering, corrosive acid fumes and spills.
·Electrolyte will not stratify, no equalization charging required, Allows faster recharge.
·Increases durability and deep cycle ability for heavy demand applications.
·Less than 2% per month stand loss means little deterioration during transport and storage.

Application

·Solar and Wind energy system;
·Water Pumping ;
·Residential;
·Communications;
·Remote Monitoring;
·Refrigeration; Lighting;
·Aids to Navigation;
·Wheelchairs;
·RVs;
·Golf Cart

Home | Company | Products | Support | Service | Site map | Contact us
© STANDHBS 2009~2011 E-mail: sales@standbattery.com